This mod was performed by Cheston Chiu. He deserves all credit for these instructions. However, he and Southeast Maxima Group are not liable for your actions. These instructions are more for a guide, not "true" instructions.

Warning: Racing harnesses are NOT intended for street use because they limit your body movement, try looking over your shoulder; you can't. All you can do is look forward. Just a warning.

Tools needed:

• 14mm socket
• Socket Driver

Install:

1. Remove the Back seat by pulling on the two release latches.

2. Choose two OEM seat belt bolts and place the latch that came with the harness in there, making sure you make everything flush. Hook up the two long H straps to these.

3. For the Lap belts, you need to hook them up to the back of the front stock bolts.

4. For the anti-submarine, attach it to the front left bolt.

5. Hook eveything up, tighten all the latches, and then test it out.

« Back